Oil MTCs

Engineering resins, widely used in automotive, electronics, aerospace, and medical applications, require precise mold temperature control due to their sensitivity to processing conditions. Selecting the right Mold Temperature Controller (MTC) , whether Water Mold Temperature Controllers (Water MTCs) or Oil Mold Temperature Controllers (Oil MTCs), is critical for part quality, dimensional accuracy, and production efficiency.   Practical Selection Examples for Engineering Resins (FAQ-Style Guide) 1. ABS (Non-Crystalline) Mold temperature: 50–80°C Controller type: Water Mold Temperature Controller (Water MTC) Control focus: ±1°C stability; uniform flow to avoid surface defects   2. PA66 (Crystalline) Mold temperature: 80–120°C Controller type: Water Mold Temperature Controller (Water MTC) Control focus: Improve crystallinity; reduce warpage   3. PC (Non-Crystalline) Mold temperature: 60–100°C Controller type: Water Mold Temperature Controller (Water MTC) Control focus: Balance temperature precision and cooling efficiency; maintain transparency   4. PEEK (High-Performance) Mold temperature: 180–250°C Controller type: Oil Mold Temperature Controller (Oil MTC) Control focus: High-temp stability, uniform distribution, safety protections   Engineering resin parts require consistent temperature for dimensional stability, surface finish, and mechanical properties. Proper Mold Temperature Controllers improve cycle times, reduce scrap rates, and increase production efficiency.   Engineering Resin vs Mold Temperature Controller Selection Table Engineering Resin Mold Temp Range Recommended Controller Key Control Considerations ABS 50–80°C Water Mold Temperature Controller ±1°C stability, uniform flow, avoid gloss variation PA66 80–120°C Water Mold Temperature Controller Improve crystallinity, reduce warpage PC 60–100°C Water Mold Temperature Controller Balance precision & cooling, maintain transparency PEEK 180–250°C Oil Mold Temperature Controller High-temp stability, uniform distribution, safety protections POM 90–130°C Water Mold Temperature Controller Promote crystallization, reduce shrinkage PET 80–130°C Water Mold Temperature Controller Ensure proper crystallinity, prevent defects PBT 80–130°C Water Mold Temperature Controller Maintain dimensional stability, optimize cycle time PEI 200–250°C Oil Mold Temperature Controller Ensure cavity fill, high-precision tolerances    Notes: Temperatures are typical ranges; exact values depend on mold design, material batch, part size, and surface finish. Water Mold temperature controllers  (Water MTCs)  are preferred for ≤200°C applications; Oil mold temperature controllers  (Oil MTCs) are needed for higher temperatures. Stable temperature and uniform distribution are critical for engineering resin quality and efficiency.   Looking Forward: Smarter Mold Temperature Control As highlighted in " Leveraging AI for Precision in Mold Temperature Controller Performance ", integrating AI into mold temperature controllers (MTCs)  can further improve temperature stability, optimize PID parameters automatically, and reduce cycle times for engineering resins. Nanjing Hengde is actively developing next-generation intelligent mold temperature controllers (MTCs) to combine high-precision control with AI-driven optimization, helping manufacturers achieve higher efficiency, better quality, and lower operational costs.