News

Supporting Reliable Temperature Control in Vulcanizing Processes Hengde recently visited a customer's factory to carry out routine maintenance on an oil mold temperature controller used with a vulcanizing press. The visit was part of Hengde's ongoing customer service, which includes checking equipment operating conditions, understanding how machines are being used, and providing practical guidance on daily operation and maintenance.   In vulcanizing processes, stable temperature control is important for maintaining consistent production conditions. An oil mold temperature controller circulates heated thermal oil to transfer heat to the vulcanizing equipment, helping it reach and maintain the required process temperature.   Regular equipment checks can help identify potential operating issues early and remind operators of maintenance practices that support reliable performance.   What Does Hengde Check During a Maintenance Visit? During routine maintenance visits, Hengde's team pays attention to the machine's operating condition and the customer's actual production requirements. The inspection and service work may include checking the circulation system, reviewing temperature control performance, observing the equipment for abnormal noise or leakage, and discussing any operating concerns with the customer.   The specific maintenance items depend on the machine configuration, operating conditions, and maintenance requirements.   Beyond equipment checks, these visits give Hengde an opportunity to understand how the oil mold temperature controller is used in daily production. This practical feedback helps customers better understand their equipment and gives the service team a clearer picture of any issues that may need attention.   Practical Tips for Using an Oil Temperature Controller with a Vulcanizing Press Proper operation and routine maintenance are essential for industrial temperature control equipment. During customer service visits, Hengde provides operating reminders based on the machine's configuration and application. 1. Check the thermal oil regularly Thermal oil should be checked and replaced according to its condition and the manufacturer's recommendations. Oil degradation or contamination may affect heat transfer and equipment operation.   2. Maintain sufficient thermal oil circulation Operators should pay attention to the circulation pump, oil level, and piping condition. Insufficient circulation may lead to uneven heating, temperature fluctuations, or excessive local temperatures.   3. Monitor operating temperature Set the temperature according to the vulcanizing process requirements and the equipment's rated operating range. Avoid changing settings beyond the machine's specified limits.   4. Keep an eye on leaks and abnormal operating conditions Check relevant pipes, connections, pumps, and valves for signs of leakage. Unusual noise, frequent alarms, or unstable temperature readings should be investigated rather than ignored.   5. Follow the recommended maintenance schedule Electrical components, protective devices, filters, and other machine parts should be inspected according to the equipment manual and actual operating conditions. Before maintenance work, isolate the power supply and allow hot components and thermal oil to cool to a safe temperature.   These practices can help reduce avoidable operating problems and support consistent temperature control during vulcanizing production.   Hengde: More Than a Temperature Control Equipment Supplier At Hengde, customer service does not end when a temperature control machine is delivered. Regular factory visits allow our team to learn about equipment use, answer customers' questions, and provide maintenance guidance based on real production conditions.   As a manufacturer of industrial temperature control equipment, Hengde supplies oil mold temperature controllers, water temperature control units, industrial chillers, and heating and cooling integrated machines for different manufacturing applications.   For vulcanizing presses and other industrial processes requiring controlled heating, Hengde can customize an oil temperature controller according to the required operating temperature, heating capacity, heat transfer medium, and production conditions.   Looking for an oil temperature controller for your vulcanizing press? Contact Hengde to discuss your process requirements. Our team can help you evaluate a suitable temperature control solution and provide technical support throughout equipment use.

Hengde has completed the production of two high-temperature explosion-proof oil mold temperature controllers for a customer in the flour milling industry. Both units have undergone preliminary packaging and are preparing for shipment.   Designed for high-temperature applications, these machines use thermal oil as the heat transfer medium and support a customer-specified operating temperature of 300°C. Each unit provides a heating capacity of 90 kW and is equipped with a 7.5 kW circulation pump to support thermal oil circulation during operation. - Why Explosion-Proof Temperature Control Matters in Flour Mills Flour processing environments require careful consideration of equipment safety because combustible flour dust may create an explosion hazard under certain conditions. Temperature control equipment used in these environments must therefore be selected according to the actual operating environment and applicable safety requirements.   Hengde can customize explosion-proof oil mold temperature controllers based on the customer's application, required temperature, heating capacity, installation conditions, and electrical requirements. The appropriate explosion-proof configuration should be determined through a project-specific assessment rather than relying on a standard machine configuration.   Hengde's Experience in Customized Explosion-Proof Mold Temperature Controllers Different industrial processes have different temperature control and safety requirements. Hengde has experience supplying temperature control equipment for applications across industries such as plastics processing, die casting, chemical production, and new energy manufacturing.   For high-temperature applications, Hengde can tailor oil mold temperature controllers to meet specific process requirements, including operating temperatures up to 300°C and customized heating capacities. Depending on the application, equipment configuration can also be adjusted to address installation space, circulation requirements, control functions, and explosion-protection needs.   For customers working in potentially hazardous environments, selecting suitable equipment involves more than choosing a heating capacity. The application, surrounding environment, electrical components, and required protection level must all be considered during equipment design and configuration.   Looking for a Customized Explosion-Proof Oil Mold Temperature Controller? Hengde manufactures oil mold temperature controllers, water mold temperature controllers, industrial chillers, and heating and cooling integrated machines for a wide range of industrial applications.   Whether your process requires high-temperature thermal oil heating, a specific heating capacity, or an explosion-proof configuration, Hengde can develop a customized temperature control machine based on your actual requirements. With experience across multiple industrial sectors, we work with customers to identify suitable equipment configurations for their production processes.   Contact Hengde with your required operating temperature, heating capacity, application details, and installation environment. Our team will help evaluate your requirements and recommend a suitable customized temperature control solution.

Four HEOT-50-30 Oil Mold Temperature Controllers have completed production at Hengde and are now awaiting the customer's final confirmation before packaging. The order is for a customer in Israel, with each unit configured for high-temperature oil circulation and a customer-specified operating temperature of 280°C.   For industrial processes that require elevated temperatures, selecting a suitable heating capacity is only part of the solution. The circulation system, pump performance, and temperature requirements must also match the actual process. This order reflects the importance of configuring a mold temperature controller around the customer's operating conditions rather than relying on a standard specification alone.   Order Details at a Glance Item Specification Quantity 4 units Model HEOT-50-30 Heating Capacity 30 kW per unit Heat Transfer Medium Thermal Oil Customer-Set Temperature 280°C Pump Power 4 kW per unit Destination Israel Current Status Production completed; awaiting final customer confirmation before packaging   Configured for High-Temperature Oil Circulation The HEOT-50-30 is an oil mold temperature controller designed to circulate thermal oil and provide controlled heating for industrial processes. For this project, the customer specified a temperature of 280°C, making the selection of suitable heating and circulation components an important part of the equipment configuration.   Each unit provides 30 kW of heating capacity and uses a 4 kW circulation pump. The pump supports thermal oil circulation through the connected process equipment, helping transfer heat where it is required.   At elevated temperatures, the complete system matters. The thermal oil, connected piping, seals, and process equipment must all be suitable for the intended operating conditions. Confirming these requirements during equipment selection helps customers avoid mismatches between the temperature control unit and their production process.   Why Customized Temperature Control Matters Not every industrial application can be served effectively by a standard mold temperature controller. Some processes require a specific temperature, while others need different heating capacities, circulation performance, electrical configurations, or installation arrangements.   Hengde works with customers to understand these requirements before finalizing equipment details. For this Israeli order, four HEOT-50-30 units were produced according to the agreed specifications. The machines have completed production and are waiting for the customer's final confirmation before moving on to packaging.   This confirmation step helps ensure that the equipment details are aligned with the customer's expectations before shipment preparation proceeds.   Hengde: Temperature Control Solutions Built Around Your Process Hengde has extensive experience in industrial temperature control equipment, serving applications across plastics processing, rubber manufacturing, chemical processing, die casting, new energy, and other industries. Different applications place different demands on temperature range, heating capacity, heat transfer medium, and circulation performance.   We manufacture oil mold temperature controllers, water mold temperature controllers, and customized Mold Temperature Controllers to suit different production requirements. Heating capacity, operating temperature, pump configuration, control options, and other specifications can be discussed and customized according to the project.   Looking for an oil mold temperature controller for a high-temperature process? Contact Hengde with your required operating temperature, heating capacity, and application details. Our team can help you evaluate the requirements and develop a customized temperature control solution for your production line.

Dear Customers and Partners,   To celebrate China National Day 2026, Hengde will have a holiday from October 1 to October 7, 2026.   During this period, our regular office and production operations will be temporarily suspended. We will resume normal business on October 8, 2026 (Thursday).   National Day Holiday Schedule Date Arrangement October 1, 2026 (Thursday) Holiday October 2, 2026 (Friday)   Holiday October 3, 2026 (Saturday) Holiday October 4, 2026 (Sunday)  Holiday October 5, 2026 (Monday)  Holiday October 6, 2026 (Tuesday) Holiday October 7, 2026 (Wednesday) Holiday October 8, 2026 (Thursday) Normal business resumes   During the holiday, customers can still contact us if there are any urgent matters or important project requirements. Our team will respond as soon as possible. Email:sales@sinohengde.com Tel/WhatsApp: +86 183 5196 970   Thank You for Your Continued Support Hengde appreciates the continued trust and support of our customers and partners around the world. As a manufacturer of Mold Temperature Controllers and Industrial Chillers, we remain committed to providing reliable temperature control equipment and professional service for different industrial applications.   If you are planning a new project involving a Mold Temperature Controller, Industrial Chiller, or customized temperature control solution, you are welcome to contact us during the holiday period. Our team will follow up on your requirements as soon as possible.   We wish everyone a safe and pleasant National Day holiday and look forward to continuing our cooperation after the holiday.

Hengde has completed the production of two HC-230WS Water Cooled Chillers for a customer in Iraq. The two units are designed for a WPC door panel and frame extrusion production line and are currently awaiting the customer's final confirmation before packaging.   With a cooling capacity of 230kW per unit, these industrial chillers are configured for continuous cooling requirements in extrusion production. The equipment combines a Bitzer compressor, environmentally friendly R407C refrigerant, PLC digital control, and multiple automatic protection functions to support stable and reliable operation.   Project Specifications Item Specification Quantity 2 units Model HC-230WS Cooling Capacity 230kW per unit Chiller Type Water Cooled Chiller Application WPC Door Panel & Frame Extrusion Destination Iraq Compressor Bitzer Refrigerant R407C Controller PLC Digital Controller Current Status Production completed; awaiting final customer confirmation before packaging   Built for WPC Door Panel & Frame Extrusion WPC door panels and frames are commonly produced through extrusion processes that require consistent temperature control. During continuous production, process heat needs to be removed efficiently to help maintain stable operating conditions.   For this project, Hengde supplied two 230kW water cooled chillers to provide the required cooling capacity for the customer's WPC extrusion application.   Compared with air cooled equipment, a Water Cooled Chiller can be suitable for industrial facilities where a cooling water system is available and higher-capacity cooling is required. The HC-230WS is designed around this type of industrial cooling requirement.   Bitzer Compressor and R407C Refrigerant The HC-230WS is equipped with a Bitzer compressor, a well-known refrigeration component brand widely used in industrial and commercial refrigeration applications.   The chiller uses R407C refrigerant, which is commonly used in air-conditioning and refrigeration equipment. Combined with an efficient refrigeration circuit and water cooled condenser design, the unit is configured to provide stable cooling performance for continuous industrial operation. Other key features include: PLC Digital Controller for convenient operation and monitoring Stainless Steel Water Pump for improved durability High-Efficiency System for reliable industrial cooling Low-Noise Operation for a more comfortable working environment Automatic Protection System for safer operation High Pressure Protection Low Pressure Protection Overload Protection Flow Protection   These functions help the chiller respond to different operating conditions and provide multiple layers of protection during production.   Final Confirmation Before Packaging The two HC-230WS chillers have now completed production. Before the equipment is packed, Hengde is waiting for the customer's final confirmation to make sure the configuration and equipment details meet the project requirements.   This final confirmation is an important step for customized industrial equipment, especially when the chiller needs to be integrated into an existing extrusion production line. Once confirmed, the units will proceed to the next stage of packaging and shipment preparation for Iraq.   Customized Industrial Chillers from Hengde Every production line has different requirements for cooling capacity, temperature control, installation conditions, components, and operating functions. A standard chiller configuration may not always be the most suitable solution.   Hengde manufactures Industrial Chillers, Water Cooled Chillers, and Air Cooled Chillers and can customize equipment according to the customer's actual application requirements. Cooling capacity, compressor configuration, control system, pump selection, protection functions, and other technical specifications can be considered during the equipment design process.   For this Iraq project, the 230kW Water Cooled Chiller was configured specifically for WPC door panel and frame extrusion. If you are looking for a chiller for extrusion, plastics processing, or another industrial application, contact Hengde with your cooling capacity and process requirements, and our team can help you develop a suitable customized cooling solution.

Hengde has completed the production of two HEOTD-40T-27 high-temperature oil mold temperature controllers for a customer in Chile. Those machines are now ready for shipment and will provide high-temperature oil temperature control for the customer's industrial production process.   Unlike a conventional single-unit oil mold temperature controller, this equipment features a dual-system design, combining two independent 27kW oil temperature control units into one machine. This configuration gives the customer greater flexibility in operation while maintaining a compact overall structure.   Project Specifications Item Specification Quantity 2 units Model HEOTD-40T-27 Heating Capacity 27kW × 2 Maximum Temperature 260°C Heat Transfer Medium Thermal Oil System Design Dual independent systems Application Industrial high-temperature process Destination Chile Status Production and packaging completed; ready for shipment     One Machine, Two Independent Oil Temperature Control Systems The key feature of the HEOTD-40T-27 is its dual-system configuration. The machine consists of two complete 27kW oil mold temperature controller systems integrated into one unit. More importantly, each system has its own independent temperature control circuit and operating components, allowing the two systems to work separately.   In practical operation, the customer can: Run both 27kW systems simultaneously when higher heating capacity is required. Operate only one system when the production load is lower. Control the two systems independently according to different process requirements. Keep one system operating while the other is stopped for maintenance, depending on the production arrangement.   This gives the customer a total heating capacity of 54kW when both systems operate together, while retaining the flexibility of two independent 27kW systems.   This type of design can be particularly useful when production conditions change during different stages of a process. Instead of operating one large heating system continuously, the customer has more control over how much heating capacity is actually being used.   High-Temperature Oil Heating up to 260°C The HEOTD-40T-27 is designed for applications requiring higher process temperatures. With thermal oil as the heat transfer medium, the unit can reach a maximum temperature of 260°C.   For high-temperature applications, stable temperature control is important because excessive temperature fluctuations can affect process consistency, product quality, and equipment operation. The independent dual-system configuration also gives the customer more flexibility when adjusting the required heating capacity.   Rather than simply increasing the size of a single oil temperature controller, Hengde designed this machine around the customer's actual operating requirements. The result is a high-temperature solution that combines 54kW total heating capacity with independent system operation.   Hengde Customizes Oil Mold Temperature Controllers for Different Applications Different production processes have different requirements for heating capacity, temperature range, installation space, control configuration, and operating flexibility. A standard model may not always be the most practical solution.   Hengde has experience in manufacturing oil mold temperature controllers and customized Temperature Control Equipment for industrial applications. Based on the customer's process requirements, we can customize the heating capacity, temperature range, system configuration, electrical components, and other equipment details.   For this Chilean project, the HEOTD-40T-27 dual-system Oil Mold Temperature Controllers were developed to provide two independently operable 27kW systems within one machine. This is one example of how Hengde adapts its equipment to the customer's actual production needs.   Need a customized Mold Temperature Controller for your production process? Contact Hengde with your required temperature, heating capacity, and application details. Our team can recommend or customize a suitable temperature control solution for your specific requirements.

Hengde has completed the production and packaging of one 75kW Air Cooled Chiller for a customer in Russia. The unit is now ready for shipment and will be used in a powder coating production line.   For this project, the chiller will be installed outdoors. Therefore, the customer placed special requirements on the equipment’s weather protection, particularly the electrical control box and condenser fans. These requirements were considered during the equipment configuration to ensure the chiller is better suited to outdoor operating conditions. Project Specifications Item Specification Quantity 1 unit Model  HC-25A Cooling Capacity  75 kW Chiller Type  Air Cooled Chiller Application  Powder Coating Industry Installation  Outdoor Special Requirement  Waterproof electrical control box and fans Destination  Russia Status  Production and packaging completed；ready for shipment     Designed for Outdoor Installation Outdoor installation creates additional challenges for an industrial chiller. Rain, snow, moisture, dust, and changing ambient conditions can affect electrical components and ventilation equipment if the machine is not properly configured.   For this Russian project, waterproof protection of the electrical control box and fans was a key customer requirement. Hengde paid particular attention to these areas during production and inspection.   The electrical control box was configured with outdoor installation in mind, while the condenser fan arrangement was also required to provide better protection against water exposure. This helps reduce the risk of moisture entering critical components during outdoor operation.   For industrial equipment, these details are not simply optional additions. The installation environment directly affects equipment reliability, so the chiller configuration needs to match the actual working conditions.   75kW Cooling Capacity for Powder Coating Production Temperature control is an important part of powder coating and related industrial processes. A stable cooling supply can help maintain consistent operating conditions for production equipment and support reliable continuous operation.   The HC-25A 75kW Air Cooled Chiller provides an independent cooling solution without requiring a cooling tower. This makes an air cooled design a practical choice for many industrial facilities where water resources, installation space, or cooling tower maintenance are concerns.   For customers in the powder coating industry, chiller selection should consider more than cooling capacity alone. Ambient temperature, installation location, operating hours, heat load, water flow requirements, and environmental conditions should all be evaluated before selecting a model.   Hengde Takes Customer Requirements Seriously At Hengde, we believe that a qualified Industrial Chiller is not simply a machine that meets a cooling capacity specification. The equipment must also match the customer's actual installation environment and operating requirements.   For this 75kW project, the customer's requirement for outdoor installation and waterproof protection of the electrical control box and condenser fans was treated as an important part of the project—not as a minor detail.   From technical confirmation and production to final inspection and packaging, Hengde maintains strict requirements for customer-specific configurations. This approach helps ensure that the finished Industrial Chiller is prepared for the conditions it is expected to work in.   The 75kw Air Chiller has now been fully packaged and is ready for shipment to Russia. We appreciate the customer's trust in Hengde and look forward to supporting more industrial cooling projects with reliable, application-oriented solutions.

Hengde has completed the production of one heating & cooling integrated machine for a customer in Shandong, China. The unit is now ready for shipment and will be used in a lithium battery production process, where stable heating and cooling are important for maintaining consistent process conditions.   For this project, the customer selected the HDCH-12AD-18 (W), an air-cooled heating and cooling integrated machine that combines both heating and cooling functions in one unit. This configuration allows manufacturers to manage different temperature requirements with a single piece of equipment, helping simplify the overall process setup.   HDCH-12AD-18 (W) Technical Specifications The machine is designed for water-based temperature control and provides a 36kW cooling capacity together with an 18kW heating capacity. Specification Details Model HDCH-12AD-18 (W) Quantity 1 Unit Cooling Capacity 36kW Cooling Type Air Cooled Heating Capacity 18kW Heat Transfer Medium Water Electrical Components Schneider Application Lithium Battery Production Designed for Flexible Temperature Control   A heating & cooling integrated machine can provide both heating and cooling from the same system, making it suitable for production processes where temperature conditions may need to be adjusted at different stages.   For lithium battery manufacturing, stable thermal conditions can be important in processes involving battery materials, mixing, coating, drying, and other temperature-sensitive production steps. The HDCH-12AD-18 (W) provides a practical solution by combining two temperature control functions into one air-cooled unit.   Hengde Solutions for the Lithium Battery Industry Lithium battery manufacturing is one of the key industries served by Hengde. Over the years, our heating & cooling integrated machines, mold temperature controllers, and Industrial Chillers have been applied to different processes within the new energy sector.   Hengde has established cooperation with leading lithium battery manufacturers and industry partners, including CATL, BYD, CALB, Gotion High-Tech, LG Energy Solution, Sunwoda, EVE Energy, Farasis Energy, and REPT BATTERO Energy.   Our advantage is not simply providing standard temperature control equipment. We focus on understanding the actual production process and configuring the heating capacity, cooling capacity, temperature range, control system, and other components according to the customer's requirements.   With extensive experience in industrial temperature control, Hengde continues to provide reliable and customized solutions for the rapidly developing lithium battery industry.   We appreciate the trust of our customer in Shandong and look forward to seeing this 36kW heating & cooling integrated machine put into operation.   Looking for a heating & cooling integrated machine for lithium battery production? Contact Hengde to discuss your process and temperature control requirements.

Hengde is currently completing the production of a 6kW explosion-proof air cooled chiller for a customer in Poland. The unit will be installed in a flour production facility, where cooling equipment must meet additional safety requirements due to the potential presence of combustible flour dust.   For this project, the customer specifically required an air cooled chiller with an explosion-proof design. Compared with a standard industrial chiller, the equipment is configured with safety measures suitable for hazardous industrial environments while maintaining stable cooling performance. The machine is now in the final production stage and will undergo factory testing before delivery. Explosion-proof Chillers Explosion-proof Air Chillers Explosion-proof Air Cooled Chillers   6kW Explosion-Proof Air Cooled Chiller Specifications The chiller is designed to provide reliable cooling without requiring a separate cooling tower. Its air-cooled configuration also makes installation and maintenance more convenient for industrial facilities. 1. Specification Details Cooling Capacity 6kW Type Explosion-Proof Air Cooled Chiller Application Flour Production Customer Location Poland Cooling Method Air Cooled Installation Indoor / Industrial Application Safety Design Explosion-Proof Configuration   2. Key Technical Features The explosion-proof design is adapted to the customer's operating environment, with particular attention to electrical and refrigeration system safety. The unit also features: Stable cooling performance for continuous industrial operation Air-cooled design without the need for a cooling tower Explosion-proof electrical configuration for hazardous environments High- and low-pressure protection for the refrigeration circuit Compressor overload protection for safer operation Automatic temperature control for consistent cooling Compact structure for easier installation and maintenance Customized configuration according to the customer's application requirements   Why Choose Hengde Explosion-Proof Chillers? Hengde has experience developing Explosion-proof Chillers for industries where conventional cooling equipment may not be suitable. These applications can include flour and food processing, chemical manufacturing, pharmaceuticals, new energy, oil and gas, and other environments where flammable gases or combustible dust may be present.   Rather than simply modifying a standard chiller, Hengde evaluates the customer's working environment, cooling requirements, installation conditions, and safety requirements before determining the appropriate configuration. This project for the Polish flour industry is another example of our approach to customized industrial cooling.   With experience in Industrial Chillers, mold temperature controllers, and heating & cooling integrated machines, Hengde provides temperature control solutions for customers across different industries and markets.   We appreciate the trust of our Polish customer and look forward to completing the final testing and delivering this 6kW explosion-proof air cooled chiller.   Looking for an explosion-proof chiller for a flour mill, chemical plant, or other hazardous industrial environment? Contact Hengde to discuss your cooling requirements.

Large composite components such as wind turbine blades require consistent thermal conditions during manufacturing. Recently, Hengde completed 7 Water Temperature Control Units (TCUs) for a customer in Denmark, a country with a strong presence in the global wind energy industry. The equipment is now being prepared for packaging and will soon be shipped to the customer's production facility.   For this project, the customer required more than a standard water heating solution. Based on the actual process requirements, Hengde made a modification to the conventional configuration by adding a 300L external water tank, providing additional water capacity for the wind turbine blade production process.   HWM-100-90 Water Temperature Control Unit Item Specification Model HWM-100-90 Quantity 7 Units Heating Capacity 100kW Heat Transfer Medium Water Maximum Temperature 120°C (248°F) Electrical Components Schneider External Water Tank 300L Main Application Wind Turbine Blade Manufacturing   The HWM-100-90 Water Temperature Control Unit is designed for high-capacity water heating and circulation. With a 100kW heating output and temperature control up to 120°C, it provides a stable source of hot water for industrial processes requiring continuous thermal management.   The addition of the 300L external water tank is one of the key customized features of this order. Rather than simply supplying a standard machine, Hengde adjusted the configuration according to the customer's production requirements. In our view, this is one of the most important aspects of industrial temperature control: the equipment should adapt to the process, rather than forcing the process to adapt to the equipment.   Water Temperature Control for Wind Turbine Blade Production Wind turbine blades are typically manufactured from composite materials, and temperature can have an important influence on processes such as material curing and thermal treatment. A stable Water Temperature Control Unit (TCU) helps provide consistent heating conditions and supports more uniform production results.   Hengde has experience developing customized temperature control equipment for composite materials, wind energy, new energy, plastics, and other industrial applications. Depending on the project, our water TCUs can be configured with different heating capacities, water tank sizes, pumps, temperature ranges, and control components.   We appreciate the trust of our Danish customer and are pleased to contribute our temperature control expertise to another renewable energy project.   Need a customized Water Temperature Control Unit (TCU) for wind turbine blades or composite material production? Contact Hengde(www.hengdechiller.com) to discuss your application.

Hengde has recently completed the production of 11 oil mold temperature controllers for a customer in China. The order was urgently needed, and our production team completed the entire order in just 7 days. Although a typhoon recently affected our region, we continued preparing the equipment for delivery because of the customer's urgent production schedule.   We understand that equipment delays can directly affect a customer's production plans. When customers face urgent requirements, Hengde works closely with our production and logistics teams to shorten lead times wherever possible. The 11 units have now been completed and are being prepared for packaging and shipment. We sincerely appreciate our customer's trust and support.   Technical Specifications The equipment is the Hengde HEOT-75 oil mold temperature controller, designed for high-temperature process heating in the lithium battery industry. Model: HEOT-75 Quantity: 11 Units Heating Capacity: 96kW Heat Transfer Medium: Thermal Oil Maximum Temperature: 300°C (572°F) Application: Lithium Battery Industry   With a maximum operating temperature of 300°C, the HEOT-75 is designed for applications requiring stable and precise high-temperature oil circulation.   Hengde Oil Mold Temperature Controllers for Lithium Battery Production Temperature stability is particularly important in lithium battery manufacturing, where different production processes require accurate and consistent thermal control. Hengde's oil mold temperature controllers provide high-temperature heating and stable oil circulation for demanding applications such as material processing, mixing, coating, and other thermal processes.   Hengde has extensive experience providing oil mold temperature controllers, water mold temperature controllers, and industrial temperature control equipment for the new energy industry. Our temperature control solutions are used by leading lithium battery manufacturers and their supporting equipment suppliers, helping customers maintain process stability and improve production efficiency.   This urgent order is another example of Hengde's commitment to responding quickly when customers need support. We appreciate the continued trust of our customer and look forward to supporting their future production projects.   Looking for a reliable oil mold temperature controller for your lithium battery application? Contact Hengde to discuss your temperature control requirements.

Hengde has recently completed the production of a heating & cooling integrated machine for a customer in Thailand. The unit has undergone factory testing and received protective packaging. It is now waiting for wooden crate packaging before its overseas shipment.   The customer selected this system for an industrial temperature control project that requires both heating and cooling in a single unit. We sincerely appreciate our customer's trust and support and look forward to continuing our successful cooperation on future projects. Technical Specifications Cooling Capacity: 30kW Heating Capacity: 12kW Temperature Control Range: 4–120°C Temperature Accuracy: ±1°C Key Features * Integrated heating and cooling system for year-round temperature control * Equipped with a high-quality imported compressor for reliable cooling performance * Built-in anti-freezing and over-temperature protection for safe operation * Compatible with multiple refrigerants, including R134a, R410A, R407C, and R404A * Refrigeration system protected by high- and low-pressure safety switches * Compressor and water pump feature independent overload protection * High-efficiency shell-and-tube condenser for rapid heat transfer and effective heat dissipation * Compact plate evaporator design helps reduce installation space * User-friendly control system with a simple structure for convenient operation and maintenance Why Choose Hengde Heating & Cooling Integrated Machines? With years of experience in manufacturing mold temperature controllers, industrial chillers, and heating & cooling integrated machines, Hengde understands the temperature control requirements of a wide range of industries. By combining the functions of a mold temperature controller and an industrial chiller into one compact unit, our heating & cooling integrated machines help customers save installation space, simplify system layouts, and improve production efficiency.   Widely used in plastics processing, chemical manufacturing, pharmaceutical production, new energy, food processing, and laboratory applications, Hengde's integrated temperature control solutions deliver precise temperature regulation, reliable performance, and long-term operational stability.   Every machine is customized according to the customer's process requirements and undergoes strict factory testing before delivery, ensuring dependable quality and consistent performance worldwide.   Looking for a reliable heating & cooling integrated machine for your production line? Contact the Hengde team today to discuss your application and discover the right temperature control solution for your business.