40hp 120kw 30ton Industrial Air Cooled Screw Chiller HC-120AS

Hengde 120 kw air-cooled screw chiller, also known as 40hp air-cooled screw chiller or 30 ton air-cooled screw chiller. Widely used in plastics and rubber, chemicals, electronics, die-casting, concrete mixing, textiles, petroleum, marine, surface treatment and other industries.

The Features of Hengde 120 kw Air Cooled Screw Chiller:

• The imported semi-hermetic screw compressor is selected. Compared with the traditional compound compressor, it has the advantages of high efficiency, quiet operation, simple operation and long service life;
• World-famous brand refrigeration components are employed to guarantee the quality and stable operation of the unit;
• The evaporator and condenser are both equipped with the latest high-efficiency threaded heat exchange copper tubes with high heat transfer coefficient. At the same time, the evaporation inside the tube and the condensation outside the tube have high heat transfer efficiency, ensuring the good refrigeration performance of the unit;
• The independent refrigeration circuit can be maintained and repaired separately without affecting the use of the whole machine;
• The unit is directed by a microcomputer programmable controller. The segmented energy regulation system of the compressor can precisely and in due time control the matching of cooling capacity with cooling load;
• Ensure the highest operating efficiency and the lowest energy consumption of the unit, and achieve reliable energy-saving operation.

Model And Technical Parameter：

Notes：

If this model is not suitable for your existing products, please inform us of the following information, and we can accurately recommend a suitable model to you:

1. Application industry;

2. Cooling capacity (if you don't know the specific cooling capacity, please kindly provide the machine flow, inlet and outlet temperature of the equipment);

3. Ambient temperature;

4. Refrigerant type, R22, R134a, R407c or other, please specify;

5. Voltage;

6. Any other special requirements, such as pump flow, pressure requirements, explosion-proof requirements, etc.

Our Advantages: 

1 - The Factory We Own

• Specializing in water mold temperature controller and oil mold temperature controller design, production and sales more than 10 years, with area of 15000sqm,over 150 employees.
• The engineering team has an average of 15 years of experience in industrial refrigeration. The sales team has an average of 8 years of experience in the field..
• We always provide customized solutions according to specific requirements. Our quality control process consists of three steps: incoming quality control, process quality control, and outgoing quality control. All products come with a 12-month warranty. During the warranty period, if any problem is caused by defects in the mold temperature controller itself, we will offer services until the problem is resolved.

2 - The Partners we cooperate.

3 - The Glowing Reviews from Numerous Customers. 

4 - The Abundant Industry Cases We Present.