240kw 65ton Industrial Air Cooled Screw Chillers Manufacturer HC-240AS

Hengde 240 kw air-cooled screw chiller, also referred to as 80 hp air-cooled screw chiller or 65 ton air-cooled screw chiller, is commonly used in petroleum, plastics and rubber, chemicals, electronics, die-casting, surface treatment, textiles, marine, and concrete mixing sectors.

The Features of Hengde 240kw Air Cooled Screw Chiller:

• The imported semi-hermetic screw compressor is adopted. Compared with the conventional compound compressor, it offers high efficiency, quiet running, straightforward operation and a lengthy service life;
• World-famous brand refrigeration elements are adopted to guarantee the quality and steady operation of the unit;
• The evaporator and condenser are equipped with the newest high-efficiency threaded copper heat exchange tubes possessing a high heat transfer coefficient. At the same time, tube-interior evaporation and tube-exterior condensation have high heat transfer efficiency, ensuring the unit's good refrigeration effect;
•  The unit is operated by a microcomputer programmable controller. The compressor's segmented energy regulation system can precisely and timely control the coordination of cooling capacity and cooling load;
• The separate refrigerating circuit can be maintained and repaired independently without impacting the utilization of the entire mechanism;
•  Guarantee that the unit operates with supreme efficiency and minimal energy expenditure to achieve reliable energy-saving functioning.

Model And Technical Parameter：

Notes：

If this model is not suitable for your existing products, please inform us of the following information, and we can accurately recommend a suitable model to you:

1. Application industry;

2. Cooling capacity (if you don't know the specific cooling capacity, please kindly provide the machine flow, inlet and outlet temperature of the equipment);

3. Ambient temperature;

4. Refrigerant type, R22, R134a, R407c or other, please specify;

5. Voltage;

6. Any other special requirements, such as pump flow, pressure requirements, explosion-proof requirements, etc.

Our Advantages: 

1 - The Factory We Own

• Specializing in water mold temperature controller and oil mold temperature controller design, production and sales more than 10 years, with area of 15000sqm,over 150 employees.
• The engineering team has an average of 15 years of experience in industrial refrigeration. The sales team has an average of 8 years of experience in the field..
• We always provide customized solutions according to specific requirements. Our quality control process consists of three steps: incoming quality control, process quality control, and outgoing quality control. All products come with a 12-month warranty. During the warranty period, if any problem is caused by defects in the mold temperature controller itself, we will offer services until the problem is resolved.

2 - The Partners we cooperate.

3 - The Glowing Reviews from Numerous Customers. 

4 - The Abundant Industry Cases We Present.